Metal Wire Cloth Lab Sieve Set Granularity Refractory In Building Industry
Introduction
1. Our company specializes in the production of test sieves and corresponding standard sieve shakers for more than 15 years. Screen cloth of our test sieves conforms to ISO3310:2012, ASTM, TYLER, JIS, DIN, BSI and subjects to tool microscope and projector examination.
2. Test sieves are suitable for exact mesh analysis, test, measure, classification of granular material, widely used in abrasive, building materials, chemical, pharmaceutical, metallurgy industries, etc.
Features
1. Small footprint to saving place;
2. Low noise and energy consumption
3. Easy to operation
4. Easy to maintain and clean
5. Wide screen material and good screen effect
6. It can ensure the accuracy and repeatability of test results.
7.The frame, cover and bottom of test screen are made of high-quality stainless steel.
Structure
1) Screen frame: polishing or not, according to customer requirements
2) Screen cloth: two kinds-wire cloth, perforated plate
3) Screen cloth and frame are fixed by welding, can withstand temperatures up to 300 degree.
Apply in Industry
Widely used in mineral, stone, ceramics, metallurgy, chemical, refractory, grain and other sectors of the classification of materials and small particle filter.
Classification
The test screen is classified according to the industry: grain screen, casting screen, sugar screen, abrasive screen, construction screen, stone screen, asphalt screen, soil screen, pharmacopoeia screen, lime screen, cement screen, sand screen, tea screen, flour special screen, diamond standard screen, cell screen, feces screen, cow feces analysis screen, etc.
Technical Parameter
| Taylor screen system in the United States | United state and Canadian national standard | British standard sieve pore(mm) | International Organization Standard |
| screen size | mesh size(mm) | | principal series R20/3 (mm) | ancillary series |
| current standard | old standard | Mesh | Sieve pore (mm) | R20 (mm) | R40/3 (mm) |
| 2.5 | 8.00 | 7.925 | 5/16 inch | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 |
| 3 | 6.70 | 6.680 | 1/4 inch | 6.70 | 6.70 | | 6.30 | 6.70 |
| 3.5 | 5.60 | 5.613 | 3.5 | 5.60 | 5.60 | 5.6 | 5.60 | 5.60 |
| 4 | 4.75 | 4.699 | 4 | 4.75 | 4.75 | | 4.50 | 4.75 |
| 5 | 4.00 | 3.962 | 5 | 4.00 | 4.00 | 4.00 | 4.00 | 4.00 |
| 6 | 3.35 | 3.327 | 6 | 3.35 | 3.35 | | 3.35 | 3.35 |
| 7 | 2.80 | 2.794 | 7 | 2.80 | 2.80 | 2.8 | 2.80 | 2.80 |
| 8 | 2.36 | 2.362 | 8 | 2.36 | 2.36 | | 2.24 | 2.36 |
| 9 | 2.00 | 1.981 | 10 | 2.00 | 2.00 | 2.00 | 2.00 | 2.00 |
| 10 | 1.70 | 1.651 | 12 | 1.70 | 1.70 | | 1.60 | 1.70 |
| 12 | 1.40 | 1.397 | 14 | 1.40 | 1.40 | 1.40 | 1.40 | 1.40 |
| 14 | 1.18 | 1.168 | 16 | 1.18 | 1.18 | | 1.12 | 1.18 |
| 16 | 1.00 | 0.991 | 18 | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 |
| 20 | 0.850 | 0.833 | 20 | 0.850 | 0.850 | | 0.800 | 0.850 |
| 24 | 0.710 | 0.701 | 25 | 0.710 | 0.710 | 0.710 | 0.710 | 0.710 |
| 28 | 0.600 | 0.589 | 30 | 0.600 | 0.600 | | 0.560 | 0.600 |
Our Advantage
Our company is a ISO9001:2000 certification enterprise, we cooperate with large domestic companies and some scientific research units. The following picture is our long-term cooperator
Usage
1. The standard test screen should be placed horizontally
Confirm the power supply and nameplate requirements, and ensure that grounding; The vibrating part cannot contact with other objects; Make sure the bolts of each part are fastened.
2. Standard test screen determine the standard screen frame to be selected according to the inspected materials and corresponding standards.
3. The standard screen frame should be stacked on the base of the screen frame from bottom to top.
4. Standard test screen put the inspected material into the standard screen frame at the upper end, cover the top cover of the standard screen, adjust the height of the lever according to the total height of the standard screen frame, and then position and press the standard screen frame with the pressure plate and lock nut (note: both sides should be applied with the same force).
5. The standard test screen shall set the running time on the timer according to the material nature and feeding amount, and then turn on the power switch, and the standard test screen shall start to work.
6. After the work stops, unscrew the lock nut, remove the platen and carefully remove the standard screen frame.
7. Turn off the power.
Our Service
1. We Provide video installation instructions;
2. We offer 24-hour online consulting service;
3. 20 years production experience to ensure quality;
4. We have thorough data to ensure the quality;
5. We provide detailed instruction an product information;
6. We provide 12 months quality warranty;
7. We have professional engineer team ensure to provide the most professional equipment;
If you want to get more information of product, please contact us!
Product Tags:
|
|
Metal Wire Cloth Lab Sieve Set Granularity Refractory In Building Industry Images
|
